I have been asked to print on pre-cut photographic paper 17 inches x 22 inches. Can this been done?
The normal minimum substrate width is 23 inches (584 mm). To load substrates down to a minimum width of 10
inches (254 mm), go to the front panel and press Settings, then Substrate > Substrate handling options > Enable
narrow substrate. With this option, print quality is not guaranteed.
Another point to keep in mind will be the lack of back tension as the substrate will not be attached to the input spindle. This can also affect quality. The length may also be too short to properly load the sheet. You should test this but the printer is not made for this type of printing so quality or functionality is not guaranteed.
RememberTo make recommendations or participate please Sign In and post a message.