Cancel search

Problem print

HP Latex 300 Series

#1 davidkinders 5 years ago

Hey I have a problem with the print quality of the printer. I had printed a panton color chart as a reference, but colors with yellow appear in stripes. Even thin lines (1mm) are not sharp

The printer is 5 months old and has barely been used.

Paper is HP Premium Poster Paper.

See attachments

Attachments
   5.jpg
   1.jpg
   2.jpg
   3.jpg
   4.jpg
#2 HP-Sonia 5 years ago

#1 Hello David You should perform the printhead cleaning routine and print a nozzle health test plot. If you still see nozzles out you can try again until the PrintHead is fine or replace it. If the error persists they you contact their reseller for further support. I hope this information helps

Was this helpful?Yes0 No0
How can we improve it?
#3 julien@igrafy.fr 5 years ago

I have had the same problem : You have to clean printheads and you have to reduce ink saturation to 90%.

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...

How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.