Cancel search

Ink collector

HP Latex 3000 Series

#1 Davidbar71 8 years ago

Hello. When I download a profile of a textile from HP Media solution for latex 3000. As I can know if I have or not to use the ink collector if it is a porous materia or not ? . Thank you.

#2 HP-MarcM 8 years ago

Hi Davidbar71,

You could find all the information about the Ink Collector in the page 26 of the User Guide. Anyway, I will talk to some of HP Latex 3000 printer expert just in case there is any specific trick.

Was this helpful?Yes0 No0
How can we improve it?
#3 HP-MarcM 8 years ago

Hi Davidbar71,

I've asked to the HP Latex 3000 experts, and the way to know if a textile can be printed without using the Ink Collector is by checking the porosity of the media, and the recommended method to do this, is described in the page 26 of the user guide. In case you do not have access to it, this is what it says:

1- If the printer has any substrate loaded, unload it.

2- Cut a piece of self-adhesive vinyl white gloss 15x50 mm (0.6x2 in) in size.

3- Stick it to the platen, covering the substrate-advance sensor.

4- Load the substrate that you want to check.

5- Open your RIP software.

6- Obtain the test file from the printer’s built-in computer: C:\Users\hplatex\Documents\HP IPS

\InkTrespassingCheck\Ink_trespassing_check.pdf.

7- Print the test file using the number of passes and substrate preset that you intend to use in future with this substrate (or a similar profile in terms of ink limit).

8- Unload the substrate.

9- Remove the strip of self-adhesive vinyl from the platen.

10- Look at the self-adhesive vinyl you have taken from the platen.

  • If the strip is completely white (has no ink on it), the tested substrate is non-porous and may be used for printing as described in this guide.
  • If the strip is non-white, the tested substrate is porous and may be used only with the ink collector installed.

11- Clean the print zone, see Clean the print zone.

Hope this will solve your question.

Was this helpful?Yes0 No0
How can we improve it?
#4 HP-MarcM 8 years ago

Hi Davidbar71,

Thanks to your question, the HP Latex 3000 Team will upload information in the HP Media Solutions Locator about which textiles require the use of the Ink Collector. You'll be able to find this feature in the technical notes column soon.

Was this helpful?Yes0 No0
How can we improve it?
#5 Davidbar71 8 years ago

Thanks for your answer . I think it's an important thing when looking for a substrate un the Hp media soluciones locutor.

Was this helpful?Yes0 No0
How can we improve it?
#6 HP-MarcM 8 years ago

Hi Davidbar71,

The Media Solutions Locator has been updated with the information. Now you can find a technical note which tells you when a textile media requires the ink collector. This feature will be available in the printer soon.

I'll like to thank you again for your feedback.

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

New comments are not available at this time

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...

How likely are you to recommend HP Large Format Knowledge Center to a colleague?
  • Not at all likely
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Extremely likely
Thanks for your collaboration
To provide additional details, click here.