Cancel search

HP Latex 365 w/ HP 64 Cutter - Cutting Alignment

#1 andrewfschmidt7263 6 months ago

So it only happens maybe 10% of our sticker cut jobs. But when we certain sticker files and use the HP Production Manager to create copies, the cutting seems to be progressively off. It starts off maybe 1/8" off center, on the first cut/sticker, then progresses to perfect on the far end of the cuts. Then the next batch of stickers different file completely is perfect the whole time. Then we re-save the original file and try to print/cut again and it happens again progressively from 1/8" off to perfect. We are not sure what the problem is, but it happens on maybe 10% of our sticker prints. Never seems to happen when doing bigger jobs (truck lettering) that aren't using HP Production Manager to make copies.

#2 HP Daniela Ciolompea 6 months ago

Hi @andrewfschmidt7263,

Please make sure to use the latest SAi version. Try to set the “Maximum distance between marks” to 40 cm. This affects the maximum vertical distance between OPOS marks. See the attached picture to help you find this setting.

If you still can’t fix it, I suggest you contact HP Support.

Attachments
Was this helpful?Yes0 No0
How can we improve it?
#3 julian7264 5 months ago

Having the same issue, one job will cut fine and the next will start out ok and then progressively get more and more out of alignment, Very frustrating. last job was 180 stickers and each one for more and more out. Help Please

Was this helpful?Yes0 No0
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

Remember
To make recommendations or participate please Sign In and post a message.

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...