Anyone offer any tips/advice on cutting magnetics with the HP 64 cutter? Is it even possible?

Hi @brian.jackson6927,

It is important to check if the Magnets Media is certified for HP Cutter.

Here are the Specs for cutting:

Cut force 0 to 400 grams of downforce, in 5-gram steps Cut thickness 0.05 to 0.25 mm (0.002 to 0.01 in); 0.8 mm (0.03 in) with optional sandblast blade

It's not possible to cut any magnetic that is outside of that range of thickness.

Try to donwload a media profile adapted for your Magnets Media, otherwise you might need to contact HP Support.

Thank you. Yes, the media is HP certified - just checked on the HP site. Good to know about the sandblast blade. Much appreciated.

I hope one day I am able to help someone like you have helped me.