Our printer has been making some interesting sounds lately and so I did some looking through the info on the Web Server and found this:

Service Maintenance Kit #1 3%

Service Maintenance Kit #2 0%

Service Maintenance Kit #3 12%

We just replaced the maintenance cartridge and it says it is at 100%.

Is this something I need to be worried about?

What do these Kits do and what are the part numbers for them?

#1 Hi for the smk1,2&3 is to keep your printer always in working condition, there is some of the spare parts with life spend, during smk is to replace those parts and maintain the printer, and this must be done by service engineer. service maintenance kits counter is from 0%-100% , need to be replace while reach 100% for the maintenance cartridge is to maintenance the PH, and is wear and tear, the counter is start from 100% to 0%. once reach 0% you need to replace that printhead maintenance cartridge.

I was facing this similar issue one of the main reason of creating these voice that if we dont use printer long time, I also didn't use my printer almost 6 months and when I start using this voice occurs, well I change my internal kit I bought it from online brands coupons if you wanna buy or need some other stuff must once check there.

I had the same issues. but all went a week after I updated it. We know how difficult it is nowadays to invest. I mostly buy all my electronics from Quality buy

what is part number for smk 3 for 570 anybody please?

#5 Service Maintenance Kit 3 | M0E29-67087 https://digitalmediawarehouse.com/products/service-maintenance-kit-3-m0e29-67087