Cancel search

Manual Alignement Question - Please can you assist?

HP Latex 300 Series

#1 Warwick209 3 years ago

Basically I’m trying to manually align the print head and I’m looking for a reference document to match the alignment pattern to the individual heads, I found a great document for the 3000 series - http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr\_na-c04174693&sp4ts.oid=5377995 - but can you get me the same information from HP for the 300 series?

#2 HP-MarcM 3 years ago

Hi Warwick209,

Nowadays there is not such document for the HP Latex 300 Series. Although I always recommend to do the automatic printhead alignment, you can find some information about the manual in the page 127-128 from the user guide.

Let me know if this helps you.

Was this helpful?Yes0 No0
How can we improve it?
#3 ICF_Printer1 2 weeks ago

#2 What about for the 500 series? We have a 570 and after doing an automatic alignment the black is way off on the back pass. What line should we adjust to fix that?

Was this helpful?Yes0 No0
How can we improve it?
#4 paulelw 2 weeks ago

#1 User guide can be found here:

https://support.hp.com/au-en/product/hp-latex-365-printer/12709301/manuals

Before doing any alignments and adjustments I recommend checking the health of all printheads beforehand and change out any printheads with questionable health.

Also have suitable lighting to read the Manual Alignment and also a magnifying glass or Loupe is best to see the patterns. And be very patient. Also it won't work on all substrates.

Was this helpful?Yes1 No0
100% of users thought this content was helpful.
How can we improve it?
The opinions expressed above are the personal opinions of the authors, not of HP.

Remember
To make recommendations or participate please Sign In and post a message.

Latest conversations HP Latex

Loading...

HP Latex Blog

Loading...